Jump to content


Toggle shoutbox Shoutbox Open the Shoutbox in a popup

@  jwguinn : (19 September 2017 - 01:35 AM)

nvm I found it. ripoff! I think I will make one...

@  jwguinn : (18 September 2017 - 03:31 PM)

Anyone know the part number or where to get a replacement for the short very curved vacuum line that connects to the throttle body mine is split where it connects...?

@  EnderDRM : (13 September 2017 - 12:04 AM)

So the headers and 3" exhaust is on. Sounds pretty good.

@  bigbird90650 : (31 August 2017 - 09:12 AM)

I'm looking for regal "GSX" emblems. Anyone have any for sale? I am looking for the OEM SLP GSX chrome emblems. Thanks

@  EnderDRM : (30 August 2017 - 09:27 PM)

Hi all, I thought I would get the plugs replaced while the headers are being installed. Recomendations for plugs?

@  Marchi1 : (25 August 2017 - 02:08 PM)

Speedy daddy is the default cheap. I have been running pacesetters for 10 years and with the exception of one issue have had no problems.

@  scottydoggs98 : (22 August 2017 - 02:02 AM)

every now and again you get a poorily built cross over pipe and they dont fit right. only issue with them

@  scottydoggs98 : (22 August 2017 - 02:02 AM)

those are what most of use run, good ol speed daddy

@  EnderDRM : (22 August 2017 - 01:37 AM)

http://speed-daddy.c...cription_tabbed

@  EnderDRM : (22 August 2017 - 01:36 AM)

so what about these?

@  Fast86GN : (21 August 2017 - 09:10 PM)

Where the hell is everyone?

@  chromeGS : (19 August 2017 - 01:07 AM)

Long time since ive been on... hows everyone been

@  WildGS : (12 July 2017 - 04:11 AM)

You are making me do things....I need to spend time on stupid car stuff

@  Marchi1 : (12 July 2017 - 02:35 AM)

How is everyone doing tonight?

@  scottydoggs98 : (09 July 2017 - 12:52 PM)

some of the 99 pcms will work take a 01 bin, those you can change the vin # ive found.

@  scottydoggs98 : (09 July 2017 - 12:50 PM)

the vin is kept in the pcm, you cant change the vin @ with dhp on 01 up cars, so if you use a the cars pcm with dhp it will retain the cars vin#. so if you flash a new bin to the pcm, its vin stays put.

@  RacingRegal36 : (08 July 2017 - 11:05 PM)

i need a bin that will work with this vin: 1g4cu541914206781

@  RacingRegal36 : (08 July 2017 - 10:33 PM)

does anyone have a 2000 park avenue .bin file?

@  M_Dogg : (08 July 2017 - 04:33 PM)

Ha! This guy, what up pendejo?

@  SuperDave : (08 July 2017 - 02:58 AM)

Sup FUCKERZ


Photo
- - - - -

Brake Booster Replacement, How Hard?


  • Please log in to reply
1 reply to this topic

#1 shindaiwadealer

shindaiwadealer

    Newbie

  • Members
  • Pip
  • 13 posts

Posted 10 April 2017 - 03:49 AM

Hello all.  I just had my brake booster spring a leak, I can hear it whistling while the pedal is slightly depressed.  My question is, How hard are they to replace?  I have yet to open the hood to see how much of a cluster it is.


  • 0

#2 Cumbias

Cumbias

    Member

  • Members
  • PipPipPip
  • 230 posts
  • LocationSan Bernardino, CA
  • First Name:
    Edgar

Posted 13 April 2017 - 04:14 AM

I replaced mine a couple years ago.  Had to stand on the brake pedal to get it to stop.  It was easy to remove but the most difficult part was getting it to twist and "snap" into place.  If I had the proper tools it would have been about an hour job but it took me 4 hours trying different ways to improvise and twist into looking position.  

 

You should find this helpful.  The picture is worth a thousand words.  

http://www.justanswe...ke-booster.html


  • 0




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

BoHeGeHa Dark Blue 2.1.1 © Thomas Yugar (Chemical Chaos)
Official upgrade for IPB 2.3.x © Michael ( Dev Fuse )
3.X © Upgrade by Dumbledore ( Tppskinning )