Jump to content


Toggle shoutbox Shoutbox Open the Shoutbox in a popup

@  jwguinn : (19 September 2017 - 01:35 AM)

nvm I found it. ripoff! I think I will make one...

@  jwguinn : (18 September 2017 - 03:31 PM)

Anyone know the part number or where to get a replacement for the short very curved vacuum line that connects to the throttle body mine is split where it connects...?

@  EnderDRM : (13 September 2017 - 12:04 AM)

So the headers and 3" exhaust is on. Sounds pretty good.

@  bigbird90650 : (31 August 2017 - 09:12 AM)

I'm looking for regal "GSX" emblems. Anyone have any for sale? I am looking for the OEM SLP GSX chrome emblems. Thanks

@  EnderDRM : (30 August 2017 - 09:27 PM)

Hi all, I thought I would get the plugs replaced while the headers are being installed. Recomendations for plugs?

@  Marchi1 : (25 August 2017 - 02:08 PM)

Speedy daddy is the default cheap. I have been running pacesetters for 10 years and with the exception of one issue have had no problems.

@  scottydoggs98 : (22 August 2017 - 02:02 AM)

every now and again you get a poorily built cross over pipe and they dont fit right. only issue with them

@  scottydoggs98 : (22 August 2017 - 02:02 AM)

those are what most of use run, good ol speed daddy

@  EnderDRM : (22 August 2017 - 01:37 AM)

http://speed-daddy.c...cription_tabbed

@  EnderDRM : (22 August 2017 - 01:36 AM)

so what about these?

@  Fast86GN : (21 August 2017 - 09:10 PM)

Where the hell is everyone?

@  chromeGS : (19 August 2017 - 01:07 AM)

Long time since ive been on... hows everyone been

@  WildGS : (12 July 2017 - 04:11 AM)

You are making me do things....I need to spend time on stupid car stuff

@  Marchi1 : (12 July 2017 - 02:35 AM)

How is everyone doing tonight?

@  scottydoggs98 : (09 July 2017 - 12:52 PM)

some of the 99 pcms will work take a 01 bin, those you can change the vin # ive found.

@  scottydoggs98 : (09 July 2017 - 12:50 PM)

the vin is kept in the pcm, you cant change the vin @ with dhp on 01 up cars, so if you use a the cars pcm with dhp it will retain the cars vin#. so if you flash a new bin to the pcm, its vin stays put.

@  RacingRegal36 : (08 July 2017 - 11:05 PM)

i need a bin that will work with this vin: 1g4cu541914206781

@  RacingRegal36 : (08 July 2017 - 10:33 PM)

does anyone have a 2000 park avenue .bin file?

@  M_Dogg : (08 July 2017 - 04:33 PM)

Ha! This guy, what up pendejo?

@  SuperDave : (08 July 2017 - 02:58 AM)

Sup FUCKERZ


Photo
- - - - -

2005 comp g seats


  • Please log in to reply
3 replies to this topic

#1 Stews GS

Stews GS

    Newbie

  • Members
  • Pip
  • 3 posts

Posted 19 April 2017 - 05:23 AM

I can get a full set of 2005 grand prix comp g seats in immaculate condition at a great price. Will these bolt into my 98 GS or will I need to make modifications for them to fit
  • 0

#2 scottydoggs98

scottydoggs98

    I Know Regals

  • Members
  • PipPipPipPipPipPipPipPipPipPip
  • 1,225 posts
  • LocationNJ
  • First Name:
    scott

Posted 19 April 2017 - 08:34 PM

they fit, grab both sides of the plugs so you can wire them in.


  • 0

#3 Marchi1

Marchi1

    Official RegalGS.org Flagship Car Owner

  • Forum Moderator
  • 5,041 posts
  • LocationMichigan

Posted 12 May 2017 - 05:46 PM

OR just cut the plug off the regal seat.



#4 Reefer82

Reefer82

    Donated for server MODS

  • Members
  • PipPipPipPipPipPipPipPipPipPipPipPipPipPipPipPipPipPipPipPip
  • 3,135 posts
  • LocationBrownsburg, IN
  • First Name:
    Kent

Posted 11 June 2017 - 01:25 PM

They'll fit nicely and be a great upgrade.

I used to run gxp seats which are the same only with the "suede" in the lower back and middle of the seat cusion. Definitely helps with sliding around but they're pretty hard to find.
  • 0




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

BoHeGeHa Dark Blue 2.1.1 © Thomas Yugar (Chemical Chaos)
Official upgrade for IPB 2.3.x © Michael ( Dev Fuse )
3.X © Upgrade by Dumbledore ( Tppskinning )