Jump to content


Toggle shoutbox Shoutbox Open the Shoutbox in a popup

@  MrWOT : (18 November 2017 - 05:55 PM)

Well that was fun, did mounts, found engine mount bracket sheared.

@  scottydoggs98 : (03 November 2017 - 11:49 PM)

no way you blew it up lol coupler might be bad already if its clicking when you turn th epulley back and fourth .

@  griff-97gs : (03 November 2017 - 04:43 PM)

blew my supercharger this weekend wen my serpentine belt snapped coming off the freeway anyone know the cost to hav one rebuilt

@  Loly : (23 October 2017 - 08:29 PM)

Check out MPD for hoods, I have one and Crazyguy03 has one as well and they are great for heat release and Cold Air (RAM AIR). Here's the link.... http://www.mpd1.com

@  bad108 : (19 October 2017 - 02:14 PM)

hoods

@  jwguinn : (16 October 2017 - 02:36 PM)

Anyone know the actual flow rate on siemens 60lb injectors? I have seen anywhere 60-65, that is big difference. I used 62 in my tune...

@  jwguinn : (19 September 2017 - 01:35 AM)

nvm I found it. ripoff! I think I will make one...

@  jwguinn : (18 September 2017 - 03:31 PM)

Anyone know the part number or where to get a replacement for the short very curved vacuum line that connects to the throttle body mine is split where it connects...?

@  EnderDRM : (13 September 2017 - 12:04 AM)

So the headers and 3" exhaust is on. Sounds pretty good.

@  bigbird90650 : (31 August 2017 - 09:12 AM)

I'm looking for regal "GSX" emblems. Anyone have any for sale? I am looking for the OEM SLP GSX chrome emblems. Thanks

@  EnderDRM : (30 August 2017 - 09:27 PM)

Hi all, I thought I would get the plugs replaced while the headers are being installed. Recomendations for plugs?

@  Marchi1 : (25 August 2017 - 02:08 PM)

Speedy daddy is the default cheap. I have been running pacesetters for 10 years and with the exception of one issue have had no problems.

@  scottydoggs98 : (22 August 2017 - 02:02 AM)

every now and again you get a poorily built cross over pipe and they dont fit right. only issue with them

@  scottydoggs98 : (22 August 2017 - 02:02 AM)

those are what most of use run, good ol speed daddy

@  EnderDRM : (22 August 2017 - 01:37 AM)

http://speed-daddy.c...cription_tabbed

@  EnderDRM : (22 August 2017 - 01:36 AM)

so what about these?

@  Fast86GN : (21 August 2017 - 09:10 PM)

Where the hell is everyone?

@  chromeGS : (19 August 2017 - 01:07 AM)

Long time since ive been on... hows everyone been

@  WildGS : (12 July 2017 - 04:11 AM)

You are making me do things....I need to spend time on stupid car stuff

@  Marchi1 : (12 July 2017 - 02:35 AM)

How is everyone doing tonight?


Photo
- - - - -

Tuning my 01 park avenue need tuners help


  • Please log in to reply
10 replies to this topic

#1 RacingRegal36

RacingRegal36

    I Know Regals

  • Members
  • PipPipPipPipPipPipPipPipPipPip
  • 1,169 posts
  • LocationPueblo ,Co
  • First Name:
    Jimmie

Posted 08 July 2017 - 08:39 PM

I need help guys, so using dhp tuner and its software it will download and save my file under a .bin but it will say file unsupported, error 73 severity 1 when trying to open in dhp, and in tiny tuner it will say unsupported osid. How do i go about this? How do i work around this?
  • 0

#2 scottydoggs98

scottydoggs98

    I Know Regals

  • Members
  • PipPipPipPipPipPipPipPipPipPip
  • 1,254 posts
  • LocationNJ
  • First Name:
    scott

Posted 08 July 2017 - 11:04 PM

https://www.dropbox....201866.bin?dl=0 this is a working l67 2000 park ave bin, none of the newer ones work that i have. 

 

2000 and 01 are close enough where it should work.  dont have a na bin. so you have to make it na if thats what you got. 


  • 0

#3 RacingRegal36

RacingRegal36

    I Know Regals

  • Members
  • PipPipPipPipPipPipPipPipPipPip
  • 1,169 posts
  • LocationPueblo ,Co
  • First Name:
    Jimmie

Posted 08 July 2017 - 11:14 PM

https://www.dropbox....201866.bin?dl=0 this is a working l67 2000 park ave bin, none of the newer ones work that i have.

2000 and 01 are close enough where it should work. dont have a na bin. so you have to make it na if thats what you got.


Thank you so much scott ill check if it works. Its a 01 ultra so supercharged
  • 0

#4 RacingRegal36

RacingRegal36

    I Know Regals

  • Members
  • PipPipPipPipPipPipPipPipPipPip
  • 1,169 posts
  • LocationPueblo ,Co
  • First Name:
    Jimmie

Posted 09 July 2017 - 02:26 AM

When i go to flash this tune i know to do a full write, whats the likely odds that i would brick the pcm doing this? Because i am technically overwriting my stock osid with a new osid right?. Even though dhp recognized my osid to not be supported? This should if done right, allow me to begin tuning right? Because it will no longer see the original osid as not supported?
  • 0

#5 scottydoggs98

scottydoggs98

    I Know Regals

  • Members
  • PipPipPipPipPipPipPipPipPipPip
  • 1,254 posts
  • LocationNJ
  • First Name:
    scott

Posted 09 July 2017 - 02:42 AM

if you have a spare pcm, use that to flash the new tune, this way you can always go back to the bin and pcm for the car if the 2000 bins not working well.

 

so basically if you flash the new bin to the cars pcm, your original bin is lost forever. 


  • 0

#6 RacingRegal36

RacingRegal36

    I Know Regals

  • Members
  • PipPipPipPipPipPipPipPipPipPip
  • 1,169 posts
  • LocationPueblo ,Co
  • First Name:
    Jimmie

Posted 09 July 2017 - 03:38 AM

if you have a spare pcm, use that to flash the new tune, this way you can always go back to the bin and pcm for the car if the 2000 bins not working well.

so basically if you flash the new bin to the cars pcm, your original bin is lost forever.

I have the original. Bin but i cant read it with dhp its readable by hp tuner
  • 0

#7 RacingRegal36

RacingRegal36

    I Know Regals

  • Members
  • PipPipPipPipPipPipPipPipPipPip
  • 1,169 posts
  • LocationPueblo ,Co
  • First Name:
    Jimmie

Posted 11 July 2017 - 04:40 PM

if you have a spare pcm, use that to flash the new tune, this way you can always go back to the bin and pcm for the car if the 2000 bins not working well.

so basically if you flash the new bin to the cars pcm, your original bin is lost forever.

Welp oem bin is lost forever lol i have my old bin saved and can open it with hp tuners so techincally not lost forever lol just not supported by dhp. Any way i flashed it and the car started fine. Now what?
  • 0

#8 scottydoggs98

scottydoggs98

    I Know Regals

  • Members
  • PipPipPipPipPipPipPipPipPipPip
  • 1,254 posts
  • LocationNJ
  • First Name:
    scott

Posted 11 July 2017 - 09:45 PM

why else would you read and write a bin file, to tune it. hop to it. lol


  • 0

#9 RacingRegal36

RacingRegal36

    I Know Regals

  • Members
  • PipPipPipPipPipPipPipPipPipPip
  • 1,169 posts
  • LocationPueblo ,Co
  • First Name:
    Jimmie

Posted 12 July 2017 - 06:59 PM

why else would you read and write a bin file, to tune it. hop to it. lol


I did like a few hours after i posted. Put my will overkill trans settings, an 05 gtp timing settings and fan settings from my buick regal gse. No kr all it has is ngk tr6 plugs, cold air intake. So far doing good. Shifts incredibly smooth and for a stock 3.8 with very few adjusted settings, pulls nicely. Thanks scotty
  • 0

#10 scottydoggs98

scottydoggs98

    I Know Regals

  • Members
  • PipPipPipPipPipPipPipPipPipPip
  • 1,254 posts
  • LocationNJ
  • First Name:
    scott

Posted 12 July 2017 - 09:14 PM

cool, sounds like shes a happy car.  tuning a stock car is far from a waste. stock tune is crap.  trans tune will wake it up for sure just by its self. 


  • 0

#11 RacingRegal36

RacingRegal36

    I Know Regals

  • Members
  • PipPipPipPipPipPipPipPipPipPip
  • 1,169 posts
  • LocationPueblo ,Co
  • First Name:
    Jimmie

Posted 13 July 2017 - 12:38 AM

cool, sounds like shes a happy car. tuning a stock car is far from a waste. stock tune is crap. trans tune will wake it up for sure just by its self.


Agreed, her name is lucy haha because my grandma liked big boats like these haha
  • 0




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

BoHeGeHa Dark Blue 2.1.1 © Thomas Yugar (Chemical Chaos)
Official upgrade for IPB 2.3.x © Michael ( Dev Fuse )
3.X © Upgrade by Dumbledore ( Tppskinning )