Jump to content


Toggle shoutbox Shoutbox Open the Shoutbox in a popup

@  jwguinn : (19 September 2017 - 01:35 AM)

nvm I found it. ripoff! I think I will make one...

@  jwguinn : (18 September 2017 - 03:31 PM)

Anyone know the part number or where to get a replacement for the short very curved vacuum line that connects to the throttle body mine is split where it connects...?

@  EnderDRM : (13 September 2017 - 12:04 AM)

So the headers and 3" exhaust is on. Sounds pretty good.

@  bigbird90650 : (31 August 2017 - 09:12 AM)

I'm looking for regal "GSX" emblems. Anyone have any for sale? I am looking for the OEM SLP GSX chrome emblems. Thanks

@  EnderDRM : (30 August 2017 - 09:27 PM)

Hi all, I thought I would get the plugs replaced while the headers are being installed. Recomendations for plugs?

@  Marchi1 : (25 August 2017 - 02:08 PM)

Speedy daddy is the default cheap. I have been running pacesetters for 10 years and with the exception of one issue have had no problems.

@  scottydoggs98 : (22 August 2017 - 02:02 AM)

every now and again you get a poorily built cross over pipe and they dont fit right. only issue with them

@  scottydoggs98 : (22 August 2017 - 02:02 AM)

those are what most of use run, good ol speed daddy

@  EnderDRM : (22 August 2017 - 01:37 AM)

http://speed-daddy.c...cription_tabbed

@  EnderDRM : (22 August 2017 - 01:36 AM)

so what about these?

@  Fast86GN : (21 August 2017 - 09:10 PM)

Where the hell is everyone?

@  chromeGS : (19 August 2017 - 01:07 AM)

Long time since ive been on... hows everyone been

@  WildGS : (12 July 2017 - 04:11 AM)

You are making me do things....I need to spend time on stupid car stuff

@  Marchi1 : (12 July 2017 - 02:35 AM)

How is everyone doing tonight?

@  scottydoggs98 : (09 July 2017 - 12:52 PM)

some of the 99 pcms will work take a 01 bin, those you can change the vin # ive found.

@  scottydoggs98 : (09 July 2017 - 12:50 PM)

the vin is kept in the pcm, you cant change the vin @ with dhp on 01 up cars, so if you use a the cars pcm with dhp it will retain the cars vin#. so if you flash a new bin to the pcm, its vin stays put.

@  RacingRegal36 : (08 July 2017 - 11:05 PM)

i need a bin that will work with this vin: 1g4cu541914206781

@  RacingRegal36 : (08 July 2017 - 10:33 PM)

does anyone have a 2000 park avenue .bin file?

@  M_Dogg : (08 July 2017 - 04:33 PM)

Ha! This guy, what up pendejo?

@  SuperDave : (08 July 2017 - 02:58 AM)

Sup FUCKERZ


Photo
- - - - -

Put a hole in my toof'er


  • Please log in to reply
1 reply to this topic

#1 tippietoejoe

tippietoejoe

    All the Basic Mods

  • Members
  • PipPipPipPip
  • 740 posts
  • LocationColorado Springs
  • First Name:
    Derrick

Posted 12 September 2017 - 08:03 PM

So I headed over to my mom and dads house about 2 weeks ago and didn't realize their street was slopped so bad. Well I flipped a bitch and the nose of my car hit a dip and all you could here was a crunch noise.....and backing up didnt sound any better.....so I got out of the car and there was my front mount dripping its very cool purplish coolant on the ground.....oh well it forces me to lift it up although I dont like it tucked. Anyways I thought well I wonder if there is anyone out there that could take apart my exchanger and make it slightly smaller top to bottom and maybe even help fit it to where it sits up alittle.....sure enough I found this guy Ryan on craigslist....hands down one of the best welders around here. he pulled up in his truck that was all done up like it was ready for a zombie apocalypse it was kick ass....anyways so we started looking at my engine bay and he and I started thinking about things that would be kick ass to make....I told him I wanted a bad ass airbox and he said yup....I then said I wanted some kick ass adjustable rails and swaybars and he was like sure no problem...we even talked about making some cool looking dogbones.....I cant wait to see what he comes up with....anyways he did say it will take some time as he does this stuff on the side and welds larger projects at work...so in a way I guess I am happy I chipped my toof'er....lol


Edited by tippietoejoe, 12 September 2017 - 08:06 PM.

  • 0

#2 scottydoggs98

scottydoggs98

    I Know Regals

  • Members
  • PipPipPipPipPipPipPipPipPipPip
  • 1,219 posts
  • LocationNJ
  • First Name:
    scott

Posted 13 September 2017 - 02:14 AM

i got a fb 101 tucked up there.  love to worry bout it hitting. 

 

006_zpslcqo6inm.jpg

 

003_zps7mduuzju.jpg


  • 0




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

BoHeGeHa Dark Blue 2.1.1 © Thomas Yugar (Chemical Chaos)
Official upgrade for IPB 2.3.x © Michael ( Dev Fuse )
3.X © Upgrade by Dumbledore ( Tppskinning )