Posted 16 October 2017 - 02:51 AM
What year is your car? I have the module from an 2001. There were different variations over the years. The earlier Regals have separate harnesses running across the lower control arms. After 2000, it was integrated into the main harness (no connector). I have some of those pigtails. The 97 and 98 (I think) had the long, skinny integrated module and later they went to the smaller one where the electronics are easily separable from the hydraulics.
Posted 06 November 2017 - 04:28 PM
Have you measured the resistance on both sides of both wheel sensor connectors? If you have a bad part of the harness, it's probably easier to pull that section back and repair while connected to the car, since it's all tied into the engine harness.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users