Drive belt rubbed wiring harness
Posted 25 June 2018 - 11:15 PM
I then noticed the wiring harness got mangled a bit by the drive belt
Can I just sand off that corrosion and shrink wrap/tape it up? Or should I cut those sections out and resolder them?
Posted 26 June 2018 - 10:30 AM
id cut and re solder them together. if they have been bare for a while you'll find dark wire inside the insulation when you strip it back. if you find that, you need to cut it all out to clean shinny copper.
if thats the crank harness you can just replace it, they tend to fail with age.
Posted 27 June 2018 - 11:52 AM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users