Jump to content


Toggle shoutbox Shoutbox Open the Shoutbox in a popup

@  marcleach75 : (03 January 2019 - 01:59 PM)

You too bubba.

@  fastnysix : (02 January 2019 - 01:29 PM)

Happy New Year

@  marcleach75 : (31 December 2018 - 03:21 PM)

Hello.

@  WildGS : (27 December 2018 - 05:53 PM)

hello people!

@  buck531 : (24 December 2018 - 04:11 AM)

uhhh sure?

@  shindaiwadealer : (23 December 2018 - 05:32 AM)

Emergency ??? Are Napa crank sensors good??

@  marcleach75 : (19 December 2018 - 08:22 PM)

You too bubba.

@  Regalzzz : (13 December 2018 - 05:44 AM)

I hope everyone has a Merry Christmas on here!!

@  ejguillot : (13 December 2018 - 01:57 AM)

I plan to be on here more often. Don't want this site to fade away.

@  ejguillot : (13 December 2018 - 01:51 AM)

hello all

@  LS5454SS : (25 November 2018 - 01:45 AM)

@wildgs :*(

@  WildGS : (15 November 2018 - 02:48 AM)

almost forgot about this place until the bill showed up....

@  marcleach75 : (24 October 2018 - 07:30 PM)

Are you sure it's the actuator not the vacuum line?

@  gumba : (23 October 2018 - 11:35 PM)

need help with blend door actuator is there one on the passenger side?

@  NohawkRob : (21 October 2018 - 12:21 PM)

transmission flush

@  marcleach75 : (19 October 2018 - 07:15 PM)

Who knows, people use apps nowadays. Not to many youngins use urls.

@  alemstrom : (08 October 2018 - 12:12 AM)

What's poppin! We don't know what to do to liven up the website!

@  steveyjr1982 : (01 October 2018 - 09:58 PM)

The majority of people on fb are annoying.

@  ejguillot : (21 September 2018 - 03:03 PM)

Agreed. I'd rather pay money to keep this site going than be on Facebook and having everything on there be used to make a buck for Zuck and company.

@  Vicious6 : (20 September 2018 - 01:48 PM)

We need to get this place moving again! Post link to this site on every social media site you know! Been around too long and we can't let it go down..........


Photo
- - - - -

New and Old Crank Sensor 18x Signal Caps at 1606 rpm


  • Please log in to reply
No replies to this topic

#1 shindaiwadealer

shindaiwadealer

    Wheres the Newbie Guide?

  • Members
  • PipPip
  • 26 posts

Posted 23 December 2018 - 07:03 PM

Just replaced the crank sensor cause I am getting a quick jerk from intermittent missfire on throttle at any throttle position.  I replaced the cam sensor a month ago but I soon figured out after the sensor replacement the magnet in the cam is gone so the sensor is not working from this.

 

What I have noticed before I changed the crank sensor is the 3x signal matches the rpm of the engine perfectly, but, the 18x signal matches the rpm up until 1606 rpms and that is all the higher it goes.  The new sensor is a BWD from advance and it is doing the exact same thing of the original GM sensor I just took out.

 

Is this correct or am I missing something?


  • 0




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

BoHeGeHa Dark Blue 2.1.1 © Thomas Yugar (Chemical Chaos)
Official upgrade for IPB 2.3.x © Michael ( Dev Fuse )
3.X © Upgrade by Dumbledore ( Tppskinning )